1. It is forbidden to rub against other objects when China coated stainless steel wire rope is running at high speed:
China coated stainless steel wire rope should avoid friction with other objects outside the non-matching wheel groove when running at high speed. Because at high speed, the instantaneous frictional heat generated when the wire rope and these objects move with each other may cause martensitic structure on the surface of the wire. Although this structural change cannot be discerned with the naked eye, it is the main cause of early wire breakage.
2. The random winding of China coated stainless steel wire rope is prohibited:
When wound on the reel, the wire ropes should be arranged as neatly as possible. If it is scattered and twisted, it will cause the wire rope structure to be destroyed due to mutual extrusion during operation, resulting in early wire breakage, which directly affects the service life of the wire rope.

3. It is strictly forbidden to overload the use of China coated stainless steel wire rope:
If China coated stainless steel wire rope is overloaded, it will rapidly increase the degree of extrusion deformation, and the degree of wear between the inner steel wire and the outer steel wire and the matching wheel groove will seriously damage its work safety and shorten the service life of the pulley.
4. Strictly control the running speed:
The lower the operating speed, the less damage to China coated stainless steel wire rope. As the running speed increases, the damage of China coated stainless steel wire rope increases accordingly. Therefore, rapid changes in speed, sudden and violent loads and violent braking should be avoided during operation, which can reduce the damage to the wire rope. The service life of a wire rope is much longer than when working under maximum load at moderate operating speeds and at moderate loads at high speeds.