CONTACT US
Please contact us through the following contact information.
E-mail:
yunfeng@coatedsteelwirerope.com
WhatsAPP:
WeChat & Cellphone:
Address:
Shanguan town, Jiangyin,Jiangsu province,China
News
Galfan wire rope products laying method
- Classification:Company news
- Author:
- Origin:
- Release time:2021-03-05
- Views:0
(Summary description)Galfan wire rope products are composed of steel wire, rope core and grease. They are used for lifting, traction, tensioning and load carrying in the work of material handling machinery. As an indispensable rope, it is currently widely used in many fields related to the national economy. This article mainly talks about the rope laying method of Galfan wire rope products.
Galfan wire rope products laying method
(Summary description)Galfan wire rope products are composed of steel wire, rope core and grease. They are used for lifting, traction, tensioning and load carrying in the work of material handling machinery. As an indispensable rope, it is currently widely used in many fields related to the national economy. This article mainly talks about the rope laying method of Galfan wire rope products.
- Classification:Company news
- Author:
- Origin:
- Release time:2021-03-05
- Views:0
Galfan wire rope products are composed of steel wire, rope core and grease. They are used for lifting, traction, tensioning and load carrying in the work of material handling machinery. As an indispensable rope, it is currently widely used in many fields related to the national economy. This article mainly talks about the rope laying method of Galfan wire rope products.
1) The main equipment has been installed, the car chassis has been calibrated, and the safety gear has clamped the guide rail.
2) Assemble a heavy frame at the top level and the level of the car (the counterweight will not be placed temporarily), and hang the frame with a chain hoist.
3) Set up a temporary rope rack outside the top floor hall door, and place each bundle of Galfan wire rope products on the rack, which should be able to rotate flexibly and be convenient for rope laying.
4) First, make one end of the Galfan wire rope products, and fix the Galfan wire rope products from the rope frame → square wood → car top wheel → guide wheel → counterweight wheel → rope end to the machine room rope end plate as required.
5) Check the elevator shaft to ensure that there are no obstructions when the counterweight frame slides down. And at the bottom of the well, mark the position where the frame slides or set up temporary supports to ensure the accuracy of the length of Galfan wire rope products.
6) After the counterweight frame slides to the designated position, use a rope clamp on the top layer to clamp each Galfan wire rope product with the wire rope on the chain hoist to prevent the frame from sliding down. Then make the other end of the rope, hang it to the rope end plate and fix it, and put the rope over.
Safety measures
When Galfan wire rope products are placed with the counterweight frame, the brake device of the traction machine does not work. As the frame declines, if there is no speed control measure, the frame declines faster and faster, which may cause accidents. Therefore, in the process of laying the rope, slow speed and rope braking measures are taken, and the speed can be slowed down or stopped at any time.
1) Slow measures. Temporarily bind 2 strong square timbers on the car column, so that each Galfan wire rope product coils these 2 square timbers to the top wheel of the car in an S shape to increase the friction force when the wire rope slides down, so that the frame slides slowly.
2) Brake rope measures. On the traction wheel in the machine room, use a wood board with a thickness of about 50mm and the same width as the traction wheel. One end is placed on the traction machine frame, and 1/3 of the wood board is attached to the Galfan wire rope products of the traction wheel. When you need to decelerate or brake when laying the rope, you can stop all Galfan wire rope products by applying a certain amount of force on the other end of the board.
Conventional rope laying is carried out one by one, and operators are required to go up and down in the hoistway to check the operation of Galfan wire rope products. Elevators above 20 floors require several people to do this work at the same time, which is laborious, wasteful of manpower, and unsafe. Now, no matter how high the floor is, only one inspector can complete it. It usually takes 1 day for Galfan wire rope products to put a 20-floor elevator, but now it only takes 2 hours to prepare the rope, and the rope feeding speed is increased by 3 to 4 times. If the building has higher floors and more elevators, the more time will be saved. Practice has proved that this method is applied to the installation of Galfan wire rope products in high-rise building elevators with the advantages of time-saving, labor-saving and safety.
Scan the QR code to read on your phone
Contact Us
SHARE

CONTACT US
Mailbox: yunfeng@coatedsteelwirerope.com
gymcable@163.com
WhatsAPP: 86+13812159799
WeChat: 86+13812159799
Cellphone: 86+13812159799
Address: No. 695, Chengshan Road, Jiangyin City Jiangsu Province,China
Copyright © 2021 JiangYin Yunfeng Steel Wire Rope Products Co., Ltd. Power by 300.cn 苏ICP备17002475号-1