The maintenance and inspection of customized galfan wire rope mainly have the following points, I hope this article will help you.

1. Run
The customized galfan wire rope shall have a stable speed during operation and shall not exceed the load to avoid shock load.

2. Maintenance
The customized galfan wire rope has been coated with enough grease when it is manufactured, but after running, the grease will gradually decrease, and the surface of the wire rope will occupy dust, debris and other dirt, causing the wire rope and sheaves to wear and the wire rope to rust, so , It should be cleaned and refueled regularly. The simple method is to use a wire brush and other corresponding tools to wipe off the dust and other dirt on the surface of the wire rope, and evenly apply the heated and melted wire rope surface grease on the surface of the wire rope, or spray 30 or 40 engine oil on the customized galfan Surface of wire rope, but don't spray too much to pollute the environment.

3. Inspection records
The use of customized galfan wire rope must be regularly checked and recorded. In addition to the above-mentioned cleaning and refueling, the regular inspection should also check the degree of wear, wire breakage, corrosion, fishing hooks, rings, and lubrication wheel grooves of the customized galfan wire rope. And other vulnerable parts are worn out. Any abnormality must be adjusted or replaced in time.