Precautions for the use of wholesale 316 stainless steel wire rope:
1. It is strictly forbidden to directly use the new stainless steel wire rope under high speed and heavy load:
The new wholesale 316 stainless steel wire rope should not be used immediately under high-speed and heavy-load conditions, but should be run for a period of time under low-speed and medium-load conditions, so that the new wire rope is first adapted to the state of use, and then gradually increase the running speed of the wire rope to increase the load.
2. Wire rope jumping is strictly prohibited:
When using wholesale 316 stainless steel wire ropes and pulleys, care must be taken to prevent the wire ropes from jumping out of the pulley grooves. If the wire rope is still in use after leaving the groove, the wire rope will deform, kink, break wires and strands. This will seriously shorten the service life of the wire rope. If the rope is broken, there are usually very serious consequences.

3. Severe shock and vibration are strictly prohibited:
When using wholesale 316 stainless steel wire rope, shock loads can occur if the operating speed changes rapidly. While it may only be instantaneous loading, there is a significant security risk. When the impact load exceeds the allowable working stress of the wire rope, the impact is damaged. Even if the shock load does not necessarily cause the wholesale 316 stainless steel wire rope to break, multiple shocks can seriously shorten the service life of the wire rope. For ropes that have been in use for a while, the impact resistance will be reduced compared to new ropes due to poor elasticity.
4. It is strictly forbidden to squeeze and deform the wire rope:
Wholesale 316 stainless steel wire rope cannot be strongly squeezed during use to avoid deformation of the wire rope, resulting in structural damage, early wire breakage (martensitic brittle layer structure), broken strands or even broken rope, which significantly reduces the service life of the wire rope and endangers work safety.