1. Best Zinc alloy wire rope should be stored in a dry and closed warehouse with asphalt concrete floor. When stacking, the Best Zinc alloy wire rope in coils should be stored upright. If it must be temporarily stored in the open air, the ground should be padded with wooden slats, which should be properly covered with waterproof material. When the Best Zinc alloy wire rope needs to be stored for a long time, try to keep the Best Zinc alloy wire rope in a good lubricated state. When the storage period exceeds half a year, it should be re-lubricated.

2. Before lubricating the Best Zinc alloy wire rope, the dirt and rust accumulated on the surface of the Best Zinc alloy wire rope should be removed, and the surface of the Best Zinc alloy wire rope should be cleaned with a galvanized iron wire brush. The cleaner the surface of the Best Zinc alloy wire rope, the easier the grease penetrates into the Best Zinc alloy wire rope, and the better the lubrication effect.
3. The best Zinc alloy wire rope lubrication method is brushing. The brushing method is to manually use a special brush to apply the heated (about 60°C) hand grease on the surface of the Best Zinc alloy wire rope. Be careful to operate slowly and forcefully, so that as much grease as possible can penetrate into the interior of the Best Zinc alloy wire rope. The dip coating method is to put the grease into an iron container and heat it to 60°C, and then pass the Best Zinc alloy wire rope through a set of guide rollers to slowly pass through the melted grease in the container to make the grease Penetrates into the inner layer of Best Zinc alloy wire rope.
4. Best Zinc alloy wire rope grease should not contain acid, alkali and other harmful substances. Black calcium-based graphite grease can be used, and its grade is ZG-S.