Sometimes, we need to remove the 316 stainless steel wire rope rolled on the reel or reel, but everyone should not think that it is enough to pull it off like a tape measure. Pulling at will may cause the 316 stainless steel wire rope to bend and twist, and damage the performance of the stainless steel wire rope.

When unrolling the 316 stainless steel wire rope from the reel, some measures should be taken to prevent the 316 stainless steel wire rope from twisting or reducing the degree of twisting. Because the twisting of the stainless steel wire rope may cause knots, kinks or bends in the rope, in order to prevent this from happening, the stainless steel wire rope should be kept in tension and confirm that it is in a straight state. In addition, the rotating reel and reel have great inertia, so they cannot be pulled at will. Instead, the rotation speed of the reel and reel should be controlled so that the 316 stainless steel wire rope is slowly unrolled in sequence.

At the same time, it should be noted that the 316 stainless steel wire rope rolled on the reel should be kept as clean as possible, and should not be placed randomly, and the unfolding and retracting must be carried out in accordance with the specifications. The purpose of storing it on the reel is to properly store the 316 stainless steel wire rope in order to avoid damage. If the wrong operation causes unnecessary damage to the stainless steel wire rope, it will be troublesome.

When storing 316 stainless steel wire rope, you should choose a dry, clean, and non-corrosive place. For 316 stainless steel wire rope with a length of more than 30m, roll it on a reel for storage, so as to prevent the stainless steel wire rope from being damaged.