The factors that determine the life of the quality Zinc alloy wire rope are the main factors that cause the quality Zinc alloy wire rope to be scrapped. Usually, for the quality Zinc alloy wire rope in normal use, the reason for the scrapping of the quality Zinc alloy wire rope is that there are too many broken wires, so that the metal cross-section of the quality Zinc alloy wire rope is reduced to the scrap standard stipulated by the state.

Although there are many reasons for wire breakage. But the main reason for wire breakage is the fatigue of quality Zinc alloy wire rope, and abrasion is also one of the reasons for wire breakage, but not the main reason.

During the use of the hoisting equipment, some damage and abnormal pressure injuries will cause premature wire breakage. But the fundamental reason is that the toughness of the quality Zinc alloy wire rope material is not good and it is sensitive to stress.

For most ropeways, especially passenger ropeways, the main reason for shortening the life of quality Zinc alloy wire ropes is due to fatigue and broken wires. On the freight ropeway, the Austrian quality Zinc alloy wire rope has been running for many years. The main reason is that the material is good.

There are many reasons for fatigue wire breakage. From the quality of Zinc alloy wire rope itself, the material and wire drawing process have the greatest influence. The rope core is not good also has an impact. In terms of use, there is no lubrication, the quality of the Zinc alloy wire rope is improved, the rope is bitten on the reel, the groove of the pulley is incorrect, the shape of the rope holder on the ropeway is not suitable, the fixed rope holder does not shift for a long time, the wheel diameter/rope Diameter ratio is too small, etc. are the reasons.