How to transport and load 7*19-4.8mm wire rope from China correctly?
When hoisting with 7*19-4.8mm wire rope from China,  use the rope to penetrate the shaft hole of the rope reel or the steel pipe to penetrate the shaft hole, and then put the rope buckle on both ends of the steel pipe. It is strictly forbidden to use a forklift to directly shovel the surface of the wire rope reel, and it is strictly forbidden to roll the wire rope reel directly from a height such as the top of the car, so as to avoid shoveling the surface of the wire rope, damage to the rope reel, and disorderly coiling of the wire rope.
Note: Moisture-proof transport by railway or road, the 7*19-4.8mm wire rope from China should be covered with a rain cloth to prevent rainwater from infiltrating, causing corrosion and affecting use.
How to deal with the broken wire of 7*19-4.8mm wire rope from China?
During the use of the 7*19-4.8mm wire rope from China, if there is a broken wire, the wire rope can continue to run, so the broken wire should be removed as soon as possible. Although the method of directly clamping the broken wire with pliers is commonly used, it is by no means the best method, because it will leave a rough broken end that will affect the use. You can use pliers to clamp the broken wire and bend it back and forth until it breaks. Using this method to make the broken end of the wire caught in the middle of the strand will not cause harm.