Cheapest 7*19-4.8mm steel wire rope should be cut tightly with a distance of 10-20mm between the two sides of the cutting place, and the binding length should be 2-4 times the diameter of the rope, and then cut off with a cutting tool. Especially the multi-layer steel wire rope must be tied tightly and the distance should be longer, because the outer layer of the multi-layer steel wire rope is more and loose. Phenomenon, resulting in 7*19-4.8mm wire rope can not be used. In addition, the multi-layer steel wire rope should be cut by gas welding, or cut with a cutting tool first, and then weld the ends firmly with electric welding.

How to correctly arrange the cheapest 7*19-4.8mm steel wire rope on the drum?
The winding direction of the cheapest 7*19-4.8mm steel wire rope on the drum must be according to the twist direction of the steel wire rope, the right-twisted rope is arranged from left to right, and the left-twisted rope is arranged from right to left.
How to unwind the 7*19-4.8mm wire rope?
Cheapest 7*19-4.8mm steel wire rope should be hoisted in a standardized manner during storage, transportation, loading and unloading to avoid damage to the wooden shaft and packaging or scratch the surface of the wire rope. When the steel wire rope is uncoiled, the rope reel should be placed on the shelf, or an iron pipe can be used to penetrate the rope reel hole, and the two ends of the rope should be hung up to move the reel slowly. To avoid kinks on the wire rope, if you encounter kinks when untying the rope, stop immediately and try to remove them before proceeding.