In view of the importance of the fine steel wire rope 7*19-0.6mm, safe and correct loading, unloading, transportation, storage, use and regular inspection are very necessary.
Loading and unloading of fine steel wire rope 7*19-0.6mm:
Be sure to load and unload gently by lifting equipment or slides;
It is strictly forbidden to use the surface of the wire rope as the fulcrum of the lever to move the wire rope on the shaft;
Do not roll the wire rope where there are sharp and hard debris; please wind or release the rope in the correct direction.
Storage of fine steel wire rope 7*19-0.6mm:
Please store in a dry, ventilated, rain-proof and moisture-proof warehouse with sleepers;
When it must be stored outdoors, it must be coated with protective grease, covered with sleepers, and covered with rainproof cloth (cover);
When the used wire rope is stored, the attached sediment must be cleaned and new oil should be applied.
Use of fine steel wire rope 7*19-0.6mm:
When using a new wire rope, it should be run in at a low speed;
If possible, pre-stretch the wire rope before use, which can increase the service life;
In particular, overload, overspeed operation and shock and vibration should be prevented;
The selection, use and maintenance of wire ropes should be strictly implemented according to design standards;
The fine steel wire rope 7*19-0.6mm should be inspected and recorded regularly:
- Service life, wear condition, broken wire condition, corrosion degree, grease condition;
- Destruction of appearance and other abnormal conditions;
-Whether the connection part and the end connection are reliable.