NEWS

Check category 



CONTACT US

Please contact us through the following contact information.

E-mail:

yunfeng@coatedsteelwirerope.com

WhatsAPP:

86+15995333133

WeChat & Cellphone:

86+13812159799

Address:

Shanguan town, Jiangyin,Jiangsu province,China

News

7*19-1.2 Wire rope suppliers share the selection of wire rope [ 2023-03-15 ]

7*19-1.2 Wire rope supplier stated that when choosing a wire rope, it should be considered according to different uses: 1. Wire rope breaking force；2. Fatigue resistance；3. Wear resistance；4. Agent pressure resistance；5. Softness；6. Structural elongation and modulus of elasticity.

What are the standards for customized 7*19-1.2 wire rope scrapping [ 2023-03-03 ]

What are the standards for customized 7*19-1.2 wire rope scrapping? 1. If the radial wear or corrosion of the steel wire exceeds 40% of the original diameter, it should be scrapped. When it is less than 40%, the number of broken wires can be reduced and scrapped according to regulations.

Key points for the use of fine steel wire rope 7*19-0.6mm [ 2023-02-23 ]

In view of the importance of the fine steel wire rope 7*19-0.6mm, safe and correct loading, unloading, transportation, storage, use and regular inspection are very necessary.

Precautions for the use of 7*7-3.6mm wire rope [ 2023-02-13 ]

1. Do not use the new 7*7-3.6mm wire rope directly under high speed and heavy load immediately, but work under low speed and medium load for a period of time. After the new rope gets used to the operating conditions, gradually increase the working speed of the wire rope and increase the lifting load.

How to better use good price and quality 6*7+1*19-4.8mm wire rope [ 2023-02-03 ]

The safety inspection is mainly to check all aspects of the good price and quality 6*7+1*19-4.8mm wire rope before use, so as to ensure the lifting capacity of the wire rope within the safe range. The main method is to check the degree of various aspects of the good price and quality 6*7+1*19-4.8mm wire rope, such as: wear, deformation, bending, etc.

Main damage phenomena of wholesale 6*7+1*19-4.8mm wire ropes [ 2023-01-16 ]

The main damage phenomena of wholesale 6*7+1*19-4.8mm wire ropes are as follows: wear, fatigue, corrosion, deformation, rope biting, and overload.

Lubrication method of China 67+119-4.8mm wire ropes

Classification:Industry news
Author:
Origin:
Release time:2023-01-08
Views:0

(Summary description)There are generally the following methods for lubricating or refueling China 6*7+1*19-4.8mm wire ropes:
Brushing - manual method, low efficiency.
Dumping - manual method, low efficiency and wasteful.
Oil Bath - Dip in heated oil for good penetration.

China 67+119-4.8mm wire rope

China 6*7+1*19-4.8mm wire rope





Lubrication method of China 67+119-4.8mm wire ropes

Classification:Industry news
Author:
Origin:
Release time:2023-01-08
Views:0

Information

There are generally the following methods for lubricating or refueling China 6*7+1*19-4.8mm wire ropes:
Brushing - manual method, low efficiency.
Dumping - manual method, low efficiency and wasteful.
Oil Bath - Dip in heated oil for good penetration.
Drip lubrication or pressure lubrication – top up periodically.
Special lubricating device for wire rope – efficient and convenient.
Spray - Works well on vertical fast moving wire ropes.

Dumping method is suitable for slow-moving China 6*7+1*19-4.8mm wire ropes. Dump at the contact between the rope and the pulley. After the rope leaves the pulley, use a rag to distribute the lubricating oil evenly and remove excess lubricating oil.
The oil bath is suitable for China 6*7+1*19-4.8mm wire ropes that are horizontal or slightly inclined, and require heat treatment of the lubricant.
The advantages of using a special lubricating device are high efficiency, thorough lubrication, allowing lubricating oil to penetrate into the wire rope core, and removing impurities adhering to the China 6*7+1*19-4.8mm wire rope before refueling.