Precautions for the use of good price and quality zinc alloy wire rope:
(1) Use the pressed eyelet as far as possible for the rope head, and use less wire rope with plug-in eyelet.
(2) Generally, 6-strand and 8-strand steel wire ropes are used for hoisting operations. When purchasing good price and quality zinc alloy wire ropes, the inspection certificate of batch products should be obtained from the supplier.
(3) Good price and quality zinc alloy wire ropes should be kept in a good lubricated state. Knots and twists should be prevented during storage and use. They should be classified and hung or laid flat. In-use and scrapped wire ropes should not be mixed.
(4) When the end of the wire rope is fixedly connected with rope clips, the number of rope clips should not be less than 3, and the distance between the rope clips should not be less than 6 times the diameter of the wire rope.

Maintenance precautions for good price and quality zinc alloy wire rope:
(1) The service life of good price and quality zinc alloy wire rope has a great relationship with the method of use, so it should be used according to the regulations, no dragging and throwing, no overloading during use, no acute angle bending of the wire rope, no sharp Change the lifting speed to avoid impact load;
(2) When there is rust and dirt on the good price and quality zinc alloy wire rope, use a wire brush to remove it and apply oil;
(3) Oil the wire rope every 4 months;
(4) After good price and quality zinc alloy wire rope is coiled, it should be placed in a clean and dry place, and should not be stacked to prevent sprains;
(5) The ends of the wire ropes are fastened with steel wires or welded with alloys with low melting point, or they can be fastened with iron hoops to prevent the rope ends from loosening;
(6) During use, if oil droplets are extruded on the surface of good price and quality zinc alloy wire rope, it means that the wire rope has been subjected to considerable force. At this time, the increase of the load should be stopped, and the inspection should be carried out, and a new wire rope should be replaced if necessary.