China zinc alloy wire ropes has high strength, light weight, stable operation, and is not easy to break suddenly. It has played a huge role in lifting, traction, tensioning and bearing. Affected by factors such as frequency of use, load status and whether maintenance is in place, China zinc alloy wire ropes will have different defects. Some seemingly minor changes may be a signal that China zinc alloy wire rope needs to be replaced.
In order to prolong the service life of China zinc alloy wire ropes and reduce the probability of major accidents caused by wire rope damage during use, practitioners should fully understand the following maintenance, maintenance and inspection knowledge:

(1) Operation: The speed of China zinc alloy wire ropes should be stable during operation, and it should not be overloaded to avoid shock loads.
(2) Maintenance: China zinc alloy wire ropes has been coated with enough grease during manufacture, but after running, the grease will gradually decrease, and the surface of the wire rope will be stained with harmful substances, which will cause the wire rope and pulley to wear and rust. Therefore, it should be cleaned and refueled regularly.
(3) Inspection records: the use of China zinc alloy wire ropes must be regularly inspected and recorded. In addition to the above cleaning and refueling, the content of regular inspections should also be checked for layer damage, broken wires, corrosion and pulley grooves. In particular, the wire rope ends are consolidated at the end of the wire rope, and the external and internal wire breakage of the wire rope at the pulley block and the drum.