Search
SEARCH
confirm
cancel
Your location:
Homepage
/
/
/
Safe Use and Management of 6*7+1*19-4.8mm Wire Rope

NEWS

CONTACT US

Please contact us through the following contact information.

E-mail:

yunfeng@coatedsteelwirerope.com

 

WhatsAPP: 

86+15995333133

 

WeChat & Cellphone: 

86+13812159799


Address:

Shanguan town, Jiangyin,Jiangsu province,China

News

7*19-1.2 Wire rope supplier stated that when choosing a wire rope, it should be considered according to different uses: 1. Wire rope breaking force;2. Fatigue resistance;3. Wear resistance;4. Agent pressure resistance;5. Softness;6. Structural elongation and modulus of elasticity.
What are the standards for customized 7*19-1.2 wire rope scrapping? 1. If the radial wear or corrosion of the steel wire exceeds 40% of the original diameter, it should be scrapped. When it is less than 40%, the number of broken wires can be reduced and scrapped according to regulations.
In view of the importance of the fine steel wire rope 7*19-0.6mm, safe and correct loading, unloading, transportation, storage, use and regular inspection are very necessary.
1. Do not use the new 7*7-3.6mm wire rope directly under high speed and heavy load immediately, but work under low speed and medium load for a period of time. After the new rope gets used to the operating conditions, gradually increase the working speed of the wire rope and increase the lifting load.
The safety inspection is mainly to check all aspects of the good price and quality 6*7+1*19-4.8mm wire rope before use, so as to ensure the lifting capacity of the wire rope within the safe range. The main method is to check the degree of various aspects of the good price and quality 6*7+1*19-4.8mm wire rope, such as: wear, deformation, bending, etc.
The main damage phenomena of wholesale 6*7+1*19-4.8mm wire ropes are as follows: wear, fatigue, corrosion, deformation, rope biting, and overload.

Safe Use and Management of 6*7+1*19-4.8mm Wire Rope

  • Classification:Industry news
  • Author:
  • Origin:
  • Release time:2022-12-23
  • Views:0

(Summary description)6*7+1*19-4.8mm wire rope has the characteristics of the same section, high strength, high elasticity, good toughness, wear resistance, stable high-speed operation and can withstand impact loads. Widely used in lifting operations, it is the main rope in hoisting, and can be used for lifting, traction, binding, etc.

Safe Use and Management of 6*7+1*19-4.8mm Wire Rope

(Summary description)6*7+1*19-4.8mm wire rope has the characteristics of the same section, high strength, high elasticity, good toughness, wear resistance, stable high-speed operation and can withstand impact loads. Widely used in lifting operations, it is the main rope in hoisting, and can be used for lifting, traction, binding, etc.

  • Classification:Industry news
  • Author:
  • Origin:
  • Release time:2022-12-23
  • Views:0
Information

6*7+1*19-4.8mm wire rope has the characteristics of the same section, high strength, high elasticity, good toughness, wear resistance, stable high-speed operation and can withstand impact loads. Widely used in lifting operations, it is the main rope in hoisting, and can be used for lifting, traction, binding, etc.
In order to ensure the safe use of 6*7+1*19-4.8mm wire rope, the following points must be achieved in terms of selection, operation and maintenance:
1. The selected 6*7+1*19-4.8mm wire rope should be reasonable, and overload use is not allowed;
2. Before cutting the wire rope, it should be bundled with thin steel wire at the incision to prevent the rope end from loosening after cutting. When cutting the steel wire, prevent the steel wire debris from flying up and damaging the eyes;
3. Before using the 6*7+1*19-4.8mm wire rope, the steel wire rope must be inspected in detail. If it meets the scrap standard, it should be scrapped and replaced. It is strictly forbidden to make do with it. During use, sharp-angle bending and pick-up are not allowed to prevent being pinched or flattened;
4. The edge of the pulley where the wire rope is worn must not be broken. Where the wire rope is in direct contact with objects, equipment or sharp corners of the contact object, guards or wooden blocks should be padded to prevent damage to the wire rope;
5. Prevent the 6*7+1*19-4.8mm wire rope from contacting the wires and cables, so as to avoid the arc from damaging the wire rope or causing electric shock accidents;
6. When the steel wire rope is wound on the drum, it should be arranged tightly and neatly one by one, and should not be staggered or separated from the seam.

Key words:

Scan the QR code to read on your phone

Contact Us

留言应用名称:
Customer message
描述:
验证码

SHARE

website

CONTACT US

Mailbox: yunfeng@coatedwirerope.com

               yunfeng@coatedsteelwirerope.com
WhatsAPP: 86+15995333133

WeChat: 86+13812159799

Cellphone: 86+13812159799

Address: No. 695, Chengshan Road, Jiangyin City Jiangsu Province,China

NAVIGATION

Customer message
ewm

Copyright © 2021 JiangYin Yunfeng Steel Wire Rope Products Co., Ltd.      Power by 300.cn    苏ICP备17002475号-1