What does the daily maintenance of customized 6*7+1*19-4.8mm wire rope include?
1. Since the customized 6*7+1*19-4.8mm wire rope is composed of multiple steel wires, in the working state, the relative slip of the steel wires caused by the bending of the steel wire rope will produce a large friction force. The special grease for the steel wire rope can ensure the friction between the steel wire rope and the traction force Under the premise of reducing the friction between the wires, effectively prolonging the service life of the wire rope.
2. The customized 6*7+1*19-4.8mm wire rope has been initially lubricated by a special spraying process, and the surface of all steel wires is covered with a lubricating layer. If the surface of the steel wire rope is cleaned after installation, the steel wire rope must be cleaned in time. lubricating.

3. The surface of the customized 6*7+1*19-4.8mm wire rope should be cleaned and maintained regularly (such as half a year or 100,000 times of operation, which will increase or decrease depending on the environment and frequency of use), and cleaning agents should not be used during cleaning and maintenance. Clean the steel wire rope with liquid, otherwise it will affect the oil content and oil composition in the rope core, which will affect the normal use of the steel wire rope.
4. When cleaning and maintaining the customized 6*7+1*19-4.8mm wire rope, brush, cotton yarn, compressed air, etc. should be used to clean the surface of the steel wire rope. Appropriate amount of oil treatment.
5. Excessive lubrication will not guarantee the friction between the customized 6*7+1*19-4.8mm wire rope and the traction, and the grease on the surface of the steel wire rope should be thin and uniform (according to the grease requirements of each company, the amount of coating varies ).