Search
SEARCH
confirm
cancel
Your location:
Homepage
/
/
/
Selection method of wire rope for cutting marble

NEWS

CONTACT US

Please contact us through the following contact information.

E-mail:

yunfeng@coatedsteelwirerope.com

 

WhatsAPP: 

86+15995333133

 

WeChat & Cellphone: 

86+13812159799


Address:

Shanguan town, Jiangyin,Jiangsu province,China

News

The main damage phenomena of wholesale 6*7+1*19-4.8mm wire ropes are as follows: wear, fatigue, corrosion, deformation, rope biting, and overload.
In the production process of cheap 6*7+1*19-4.8mm wire rope, the quality of twisting is the key, if the control is not good, it is easy to have quality objections.
There are generally the following methods for lubricating or refueling China 6*7+1*19-4.8mm wire ropes: Brushing - manual method, low efficiency. Dumping - manual method, low efficiency and wasteful. Oil Bath - Dip in heated oil for good penetration.
1. Check before use Scope of inspection: check the degree of wear, corrosion, stretching, bending, deformation, fatigue, broken wire, and rope core exposure of the galfan wire rope, and determine its safe lifting capacity (including scrapping).
1. Since the customized 6*7+1*19-4.8mm wire rope is composed of multiple steel wires, in the working state, the relative slip of the steel wires caused by the bending of the steel wire rope will produce a large friction force. The special grease for the steel wire rope can ensure the friction between the steel wire rope and the traction force Under the premise of reducing the friction between the wires, effectively prolonging the service life of the wire rope.
6*7+1*19-4.8mm wire rope has the characteristics of the same section, high strength, high elasticity, good toughness, wear resistance, stable high-speed operation and can withstand impact loads. Widely used in lifting operations, it is the main rope in hoisting, and can be used for lifting, traction, binding, etc.

Selection method of wire rope for cutting marble

  • Classification:Industry news
  • Author:
  • Origin:
  • Release time:2022-08-25
  • Views:0

(Summary description)1. According to the maximum single rope tension and safety factor, determine the minimum breaking tension and diameter of the wire rope.
2. According to the characteristics of the working mechanism, determine the structure, twist direction and anti-rotation of the wire rope for cutting marble.

Selection method of wire rope for cutting marble

(Summary description)1. According to the maximum single rope tension and safety factor, determine the minimum breaking tension and diameter of the wire rope.
2. According to the characteristics of the working mechanism, determine the structure, twist direction and anti-rotation of the wire rope for cutting marble.

  • Classification:Industry news
  • Author:
  • Origin:
  • Release time:2022-08-25
  • Views:0
Information

Selection method of wire rope for cutting marble:
1. According to the maximum single rope tension and safety factor, determine the minimum breaking tension and diameter of the wire rope.
2. According to the characteristics of the working mechanism, determine the structure, twist direction and anti-rotation of the wire rope for cutting marble.
3. According to the connection form of the wire rope for cutting marble, determine the accessories of the rope end.
4. Determine the length of the wire rope according to the movement range of the working mechanism.

wire rope for cutting marble
Installation of wire rope for cutting marble:
Before installing the wire rope for cutting marble, first determine the direction of rotation of the wire rope, and then select the installation according to the principle of the left-handed drum with the right-handed wire rope, and the right-handed drum with the left-handed wire rope.
Cutting of wire rope for cutting marble:
Before cutting, the cut ends of the wire rope must be tied to prevent the strands from loosening. The wire rope should be tightly wound for a distance of nearly 3 times the diameter of the wire rope.

Key words:

Scan the QR code to read on your phone

Contact Us

留言应用名称:
Customer message
描述:
验证码

SHARE

website

CONTACT US

Mailbox: yunfeng@coatedwirerope.com

               yunfeng@coatedsteelwirerope.com
WhatsAPP: 86+15995333133

WeChat: 86+13812159799

Cellphone: 86+13812159799

Address: No. 695, Chengshan Road, Jiangyin City Jiangsu Province,China

NAVIGATION

Customer message
ewm

Copyright © 2021 JiangYin Yunfeng Steel Wire Rope Products Co., Ltd.      Power by 300.cn    苏ICP备17002475号-1