1. The quality galvanized steel wire rope should be stored in a dry and closed warehouse with an asphalt concrete floor. When stacking, the coiled wire rope should be stored upright. Those that must be temporarily stored in the open air should be padded with wooden beams on the ground and covered with waterproof materials. When the wire rope needs to be stored for a long time, try to keep the wire rope in a good lubrication state. When the storage period exceeds half a year, it should be lubricated again.

2. Before lubricating the quality galvanized steel wire rope, the dirt and rust accumulated on the surface of the steel wire rope should be removed, and the surface of the steel wire rope should be brushed clean with a galvanized iron wire brush. The cleaner the wire rope surface is brushed, the easier it is for the grease to penetrate into the wire rope and the better the lubrication effect.
3. The lubrication method of quality galvanized steel wire rope is brushing. The brushing method is to manually use a special brush to apply heated (about 60°C) hand grease on the surface of the wire rope. Pay attention to the operation slowly and forcefully, so that as much grease as possible can penetrate into the inside of the wire rope. The dip coating method is to first put the grease into an iron container and heat it to 60℃, then let the steel wire rope pass through a set of guide roller devices to slowly pass through the melted grease in the container, so that the grease can penetrate into the steel wire rope. Inner layer.
4. Good quality galvanized steel wire rope grease should not contain acid, alkali and other harmful substances. Black calcium-based graphite grease can be used, and its brand is ZG-S.