1. Custody of quality galvanized steel wire rope

1. The protection of any steel wire rope wheel is only provided during the transportation period (up to two months). It should be noted that under good storage conditions, the steel wire rope wheel can be stored for an indefinite period of time. If the quality galvanized steel wire rope must be stored on the wire rope wheel for a long time, then the following conditions should be ensured: it must be stored under environmental conditions such as moisture-proof and dust-proof, and the packaging material itself must be suitable for long-term storage ( Warehouse, steel material protection, etc.). In any case, the wire rope wheel should be placed horizontally. In addition, it is not allowed to be exposed to high temperature environments; in hot weather conditions, for oiled steel wire ropes, the steel wire rope wheel must roll half a circle every two months, in order to prevent the grease from dripping or local enrichment, resulting in steel wire rope grease Uneven content.
2. Particular attention should be paid to the complete protection of the product protection provided by the manufacturer. At the beginning or end of the storage period, the status of the wire rope wheel must be checked, and the inspection results must be marked.
3. Keep the signs on the steel wire rope wheel and the quality certificate. In order to identify the quality galvanized steel wire rope, the signs and the quality certificate are provided by the supplier, and the contents of the wire rope manufacturing should be indicated.
4. During the storage period of the quality galvanized steel wire rope, it should be placed on a suitable support to ensure that there is a proper space between the wire rope and the ground, and to avoid direct contact between the wire rope and the ground.

2. Transportation of quality galvanized steel wire rope

1. During transportation, use the fixing device to fix the wire rope wheel. Use the hole made for convenient transportation, or insert a steel pipe in the middle of the wire rope wheel, and use the lifting device to carry the wire rope wheel.
2. Appropriate equipment must be used to unload the wire rope wheel to ensure that: the outer wire rope on the wire rope wheel does not directly contact the spreader; the wire rope wheel will not fall down or any swing that may damage the wire rope or the structure of the wire rope wheel will not occur, otherwise it will It may affect the unwinding operation and braking operation of the wire rope.
3. The wire rope wheel cannot be rolled. If it is unavoidable, ensure that the edge of the wire rope wheel is not damaged, and the outer layer of the quality galvanized steel wire rope cannot touch the ground.